Filter
Top Products
❑
For Windows 95 users:
The first time you turn on the computer after turning on
the scanner, either of the following dialog boxes may
appear.
If you see either of these, follow the installation instructions
in Chapter 1 of your scanner software manual, and then see
“Power-off sequence” below.
Power-off sequence
Keep the following in mind every time you turn off your
computer and SCSI devices.
❑
When you are finished using your system, turn off your
computer first, then the scanner and other SCSI devices.
❑
While using your computer, do not turn off the SCSI device
whose terminator is active (on).
❑
Do not turn the scanner off and back on while using your
computer, otherwise the scanner may not scan properly.
Now that the connection is completed, you need to install the
scanner software. See Chapter 1 of your scanner software
manual.
device2, osr2
a
L
GT-5500 Rev.C
A5 size Chapter 1
July-18-97 Pass 0, DR
1-12
Setting Up the Scanner