Filter
Top Products
You can specify that the test be performed one time only or any number
of times in the range from 1 to 9999. Running a test multiple times is for
reliability testing of essential functions only; in most cases, running a test
only once is sufficient.
To perform the test
once
only, press
1
then
Enter.
The program displays
a submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press 2 and Enter. You see this
prompt:
Terminate checking if an error detected (Y/N)?
Press
Y
and
Enter
to terminate checking if the device produces an error, or
press
N and Enter
to repeat the tests regardless of an error.
Y
OU
see this prompt:
How many times (1-9999) :
Type the number of times you wish to repeat the test, then press
Enter.
The
tests for the device now start.
Resuming from an error
If an error occurs during a test, the test stops at that point, and an error
code and error message are displayed. If you want to record the problem,
you can print out the message on your printer. You see this prompt:
Do you want a printout of the error message(s)
(Y/N)?
To continue without printing the error
message,
press
N and Enter.
Before you request a printout, be sure your printer is turned on and
on-line, and the paper is installed correctly. Then press
Y
and
Enter.
If the
printer is not ready, the following message and prompt arc displayed:
Printer
is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the the problem
and
press
Y and Enter
to, continue printing, or press
N
and Enter
to cancel printing.
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to return to
the menu.
5-5