Filter
Top Products
Do not press the form feed or line feed buttons on the front of the
printer. This will cause the host and printer to lose synchronization of
paper position. This command reduces the need to advance the
paper.
EXAMPLE: &%Z20,1
COMMAND 19: FF VALID LOCATION
Sets the printer in accordance with the RPQ installed in the control unit
VALUE DESCRIPTION
* 0
FF is valid only at the first print position or at position
MPP+1.
1
FF is valid anywhere it occurs.
NOTES: To use this function, the RPQ should be:
IBM 3268 RPQ SC9506
IBM 3287 RPQ SC3739
IBM 4214 OPT 19=1
Available only in non-SCS operation.
EXAMPLE: &%Z19,1
Makes FF valid anywhere it occurs
COMMAND 20: AUTOMATIC FUNCTION AT END OF JOB
Sets the printer in accordance with the RPQ installed in the control unit.
VALUE DESCRIPTION
* 0
NL is automatically executed after the buffer is completed
(unless an FF, NL, or CR was last in the buffer).
1
FF is automatically executed after the print buffer is
completed (unless an FF was last in the buffer).
NOTES: To use this function, the RPQ should be:
IBM 3268 RPQ SC9507
IBM 3287 RPQ SC3740
IBM 4214 OPT 20=2
Available only in non-SCS operation
Sets the printer to issue an FF automatically at the
end of the print buffer.
A-11