Filter
Top Products
5
Changing Printer Settings From the Printer’s Control Panel
5-3
Follow these steps to select a built-in font or pitch using the
buttons on the printer’s control panel:
1. Make sure that the printer is not printing. If it is, wait until
printing has finished.
2. To select a font, press the Font button until the three Font
lights indicate the font you want as shown below.
n
= On,
o
= Off
* others means the font selected in the default-setting mode
Note:
The Font button cannot directly select OCR-B, Orator, Orator-S,
Script-C, Roman-T, or Sans Serif H. To select one of these fonts, you
must first use the default-setting mode to register it as the “other”
font. Note that the default “other” setting is Roman-T.
3. Press the
Condensed
button to turn the condensed mode on
or off. The table below shows normal and condensed printing.
Font lights Font
o o n
Draft
o n o
Roman
o n n
Sans Serif
n o o
Courier
n o n
Prestige
n n o
Script
n n n
Others