Filter
Top Products
ESC N
Format:
ASCII code:
ESC
Decimal: 27
Hexadecimal: 1B
Comments:
Select Skip-Over-Perforation
N
(n)
78 (n)
4E (n)
The variable n is the number of lines skipped between the last line
printed on one page and the first line on the next page. The range of
n is 0 to 127. You can select a one-inch margin as the printer default
setting by moving DIP switch
1-7
to the OFF position.
ESC O
Cancel Skip-Over-Perforation
Format:
ASCII code:
ESC
O
Decimal:
27
79
Hexadecimal: 1B
4F
Comments:
Cancels the mode selected by ESC N. Use the letter “O,” not the
number 0.
Line spacing
LF
Line Feed
Format:
ASCII code: LF
Decimal :
10
Hexadecimal: 0A
Control:
CTRL J
Comments:
Advances the paper one line. The paper is advanced the default
value (l/6-inch) or may be set to advance another value.
I-13