Filter
Top Products
ESC D
Format:
ASCII code:
ESC
Decimal:
27
Hexadecimal: 1B
Set Horizontal Tabs
D (n1) (n2) ... 0
68 (n1) (n2) ... 0
44 (n1) (n2) ... 00
Comments:
This command allows setting of up to 32 horizontal tabs. These are
entered as n1, n2, n3 etc. (in the range
1
to 255) with ASCII 0 as the
terminator. The tab settings n1, n2, n3 etc. must be entered in
ascending order. If nl = 0, all tabs are cleared. Tab settings are not
affected by character width. With proportional printing, tab set-
tings are based on the character width of pica print.
ESC e
Set Relative Tabs
Format:
ASCII code:
ESC
e
(n) (m)
Decimal:
27
101
(n) (m)
Hexadecimal: 1B
65
(n) (m)
Comments:
The value of m is 0 to 127. If the variable n equals 0, the format is
horizontal. If the variable n equals 1, the format is vertical.
VT
Format:
ASCII code: VT
Decimal :
11
Hexadecimal: 0B
Control:
CTRL K
Comments:
Tab Vertically
Advances the paper to the next tab setting in the channel selected by
ESC /. If no channel has been selected, channel 0 is used. If no
vertical tabs have been selected, the paper advances one line.
I-17