Filter
Top Products
The battery needs charging when
the
print becomes very slow and
the ON LINE light blinks. To charge the battery, first turn the power
OFF. Then plug the AC adapter into the back of
the
printer as shown
in Figure
2-3.
The battery charges in six to seven hours.
Figure 2-3. Plugging in the AC adapter
The printer can be used with the AC adapter connected without
waiting for the battery to charge. However, when you are finished
printing, switch the power off and charge the battery for six to seven
hours.
Once you unplug the adapter, let the printer run on its own until it
needs recharging. Recharging the battery more often than needed can
weaken it.
WARNING:
Do not charge the battery for more than 24 hours. Also,
do not leave the power switch ON when recharging the
battery and the printer is not in use. Doing either of
these may severely shorten the battery life.
18