Filter
Top Products
ESC Dec Hex Symbol Function
ESC 52 34 4
Turns Italic mode ON.
ESC 53 35 5
Turns Italic mode OFF
ESC 64 40 @
Reset Code, which resets the printer to its
power-up state, including resetting top of
form. Clears all text and control codes from
the print buffer.
ESC 65 41 A
ESC 67 43 C
ESC 67 43 C
ESC 69 45 E
ESC 70 46 F
Turns Emphasized mode OFF
ESC 71 47 G
Turns Double-Strike mode ON. Cannot mix
with Emphasized and Condensed modes.
Turns Double-Strike mode OFF
ESC 72 48 H
ESC 75 4B K
Sets line spacing to n/72 inch (n-dot). Format:
CHR$(27)“A”CHR$(n)
where n = 0 - 127.
Sets the form length to n
lines
in the current
line spacing. The default is 66 lines. Also
resets top of form. Format:
CHR$(27)“C”CHR$(n)
where n = 1 - 127.
Sets the form length to n
inches,
regardless
of the current line spacing. The default is 11
inches. Also resets top of form. Format:
CHR$(27)“C”CHR$(0)CHR$(n).
where n = 1 - 22.
Turns Emphasized mode ON. Cannot mix with
Compressed mode or Double-Strike mode.
Turns Single-Density Graphics mode ON.
Prints 480 dots per 8-inch line. Format:
CHR$(27)“K”CHR$(n
1
)CHR$(n
2
)
followed by n data numbers, where
n = total number of dot columns,
n
1
= n MOD 256,
n
2
= INT (n/256).
For example, to print 480 dots, n
1
= 224,
n
2
= 1.
B-3