Filter
Top Products
Epson Perfection 4180 PHOTO
6/04 Epson Perfection 4180 PHOTO - 5
EPSON Scan
Color Restoration is available in Home and Professional Modes.
1. To select Color Restoration, start EPSON Scan. You see a
screen similar to this (the example shows Home Mode).
2. Click the
Preview button at the bottom of the screen to see
your image.
3. Click
Image Adjustments.
4. When the Image Adjustments screen appears, select
Color
Restoration. Then click Close.
5. Click the
Scan button on the screen to scan your image.
Scanning Film and Transparencies
The scanner cover has a built-in transparency unit (film
adapter). To scan film or negative strips, slides, or
transparencies, you need to remove the document mat from the
scanner cover and insert the film in a holder.
The scanner comes with 3 different film holders: one for 35 mm
film or negative strips, one for 35 mm slides, and one for
medium-format (120/220) transparencies.
1. Make sure the film adapter cable is connected to
the scanner (see the Start Here sheet for instructions).
If you need to connect the cable, first turn the
scanner off. Then turn it back on again after
you connect the cable.
2. Lift the scanner cover all the way up and slide
the reflective document mat up and off of the
scanner cover.
3. Follow the instructions for the type of film you are
scanning:
If you are scanning 35 mm film or negative strips or
medium-format (120/220) transparencies, slide the film
into the corresponding holder, with the film’s shiny side
facing down.
Preview
Image
Adjustments
Color
Restoration
Close
35 mm film or negative strips
Medium-format
transparencies: Slide the
film into the holder as
shown. Then lower the
cover and press the tab to
lock it in place.
Cover tab