45
Type ipconfig /all and click enter.
z Your PC’s IP address is 192.168.2.111.
z The PC’s Subnet Mask is 255.255.255.0.
z Your PC’s MAC Address is the one entitled Physical Address
(00-00-E2-82-C3-AD).
3. This product is not found even after searching by the “Server Manager”.
Check if the power adapter and the network cable are connected to the Combo
Print Server properly.
Check if the LAN and Ready LEDs are turned on.
4. The ways to change the IP Address of the Combo Print Server.
A DHCP Server is installed in the network
If a DHCP Server is installed, you can setup to let the Combo Print Server get IP
Address from the DHCP Server automatically.
1. Open “Server Manager” and then select “TCP/IP” setting.
2. Select “Auto IP” and click “Save”.
3. Reboot the Combo Print Server.
Set up the IP Address Manually
1. Open “Server Manager” and then select “TCP/IP” setting.
2. Select “Static IP” and enter the IP Address and Subnet Mask as your computer.
Click “Save”.
3. Reboot the Combo Print Server.