Filter
Top Products
Remove out the original cartridges ,then place down each cartridge according to the
color ,in the meantime, make every cartridge in the correct position.
Remove the cartridge cart back and place the cartridges down as show in picture ,then click
the cartridges to the right position.
5)、The fifth step : Fix up the support arm
Rip the label Stick the Support arm at 25cm Rip the label
distance from the side of the printer on the balance arm
Fix the balance arm stick on the support arm as show on the picture, Rip the label on the
shortest arm ,And Stick it on the right side of the printer, but need to keep it in the same
horizontal line as show in the picture
6)、The sixth step: Installing tubes