Epson SP9890K3 Printer User Manual


 
153
Maintaining and Transporting the Printer | 153
10. Select BI-D ALL and press OK to start the alignment process.
11. When done, press to exit head alignment mode.
Replacing Ink Cartridges
Before you begin a large print job, you should check your ink levels. If one of
your cartridges is low, you can replace it before you start. Or you can wait
until the ink is expended, replace the cartridge, and then continue the job
without any loss of print quality. However, it is best to replace a low ink
cartridge before starting a large print job.
The easiest way to check ink levels is from the control panel LCD screen.
The numbers above the ink icons on the LCD screen correspond to the
9 ink cartridge slots on the printer.
The icons show the approximate amount of ink remaining.
When the red B Ink
Check light is flashing and INK LOW appears on the
LCD screen, the indicated cartridge is almost expended. Make sure you have
a replacement cartridge. When the light stays on and
REPLACE INK
CARTRIDGE
is displayed, the cartridge is expended. You must replace the
cartridge before you can continue printing.
You can install any combination of 150, 350, and 700 ml cartridges. Use the
following Epson UltraChrome K3
®
with Vivid Magenta ink cartridges:
Ink bay Slot no. Cartridge 150 ml 350 ml 700 ml
Left 1 Cyan (C) T642200 T596200 T636200
2 Yellow (Y) T642400 T596400 T636400
3 Light Cyan (LC) T642500 T596500 T636500
4 Matte Black (MK) T642800 T596800 T636800
5 Photo Black (PK) T642100 T596100 T636100
Right 6 Vivid Magenta (VM) T642300 T596300 T636300
7 Light Black (LK) T642700 T596700 T636700
8 Light Light Black (LLK) T642900 T596900 T636900
9 Vivid Light Magenta
(VLM)
T642600 T596600 T636600
Tip: You can store
partially used ink
cartridges for up to
6 months. If you do so,
Epson recommends
covering the openings
with tape.
Note: We recommend
that you use genuine
Epson cartridges and do
not refill them. The use of
other products may affect
your print quality and
could result in printer
damage.
Yields vary considerably
based on images printed,
print settings, paper type,
frequency of use, and
temperature. For print
quality, a small amount of
ink remains in the
cartridge after the
“replace cartridge”
indicator comes on.
For best printing results,
use up a cartridge within
six months of opening the
package.