Filter
Top Products
The Control Panel 229
4
4
4
4
4
4
4
4
4
4
4
4
English
✽ Print Quality A: Speed, B: Quality, C: Draft, D: Normal-360dpi, E: Fine-720dpi,
F: Super Fine-1440dpi, G: Super Photo-2880dpi
✽✽ When Super in the Advanced dialog box of the printer driver is selected,
select #2. When Super is not selected, select #1.
11. Press the Pause button to return to the READY state.
Aligning the print head manually
If you are not satisfied with the result of the automatic head
alignment, you can perform the head alignment manually. To
perform the head alignment manually, follow the steps below.
1. Press the Menu r button to enter the Menu mode.
2. Press the Paper Feed d button or Paper Feed u button to
display HEAD ALIGNMENT, and then press the Menu r
button.
3. When PAPER THICKNESS appears, press the Menu r
button.
4. Press the Paper Feed d button or Paper Feed u button to
select STANDARD or a paper thickness value between 0.1 mm
and 1.5 mm. When the paper thickness value is 0.2 mm or
1.2 mm, select STANDARD; otherwise, select the actual paper
thickness value.
5. Press the Enter
button to register your value.
6. Press the Paper Source l button, then press the Paper Feed
d button.
7. When ALIGNMENT appears on the lower row on the LCD, press
the Menu r
button.
Plain Paper (line drawing) #1 #2 - #1/
#2✽✽
#2 - -
Tracing Paper #1 #2 - #1 #2 - -