Filter
Top Products
242 Maintenance Mode
2. Press the Paper Feed d button or Paper Feed u button to
select a suitable function.
3. Press the Enter
button.
UNIT
You can select a unit of measurement to use to display length. To
select a unit, follow the steps below.
1. While in the maintenance mode, press the Paper Feed d
button or Paper Feed u button to display UNIT, and then
press the Menu r
button.
2. Press the Paper Feed d button or Paper Feed u button to
select a suitable unit.
3. Press the Enter
button to set the unit.
CUT PRESSURE
You can select a cutting pressure.
SS CLEANING
You can perform ultrasonic head cleaning.
PWR ON ROLL PPR FEED
You can save roll paper by not feeding paper after the power is on.
SHEET AUTO FEED TIME
You can select the time it takes for auto loading of the cut sheet.
When you select OFF, the printer does not feed the paper
automatically. In this case, you need to press the Pause
button
to feed the paper.