Filter
Top Products
Paper Handling 269
6
6
6
6
6
6
6
6
6
6
6
6
English
Note:
Do not touch the
Manual switch while printing is in progress.
Doing so may damage your prints.
Removing paper after take-up
After paper take-up, remove the take-up reel core as follows.
1. Turn off the Auto Take-up Reel Unit.
w
Warning:
Turn off the Auto Take-up Reel Unit before removing the
take-up reel core. If the take-up reel unit operates
unexpectedly, injury may occur.
2. Press the Paper Source l button to select Roll Auto Cut On
.
Then press and hold the Enter button for 3 seconds. The
roll paper is cut automatically.
Note:
If you are printing on very thick roll paper, it is recommended that
you set the Auto Cut setting to off (on the printer’s control panel
and in the printer driver) and press the
Paper Feed d button on
the printer to feed the paper, and then cut the paper yourself;
otherwise the paper cutter may be damaged. See “Cutting the roll
paper manually” on page 256.