Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
73 74
A
TM-T81
Specification
(STANDARD)
FS g 1 m a1 a2 a3 a4 nL nH d1...dk [obsolete command]
[Name] Write to NV user memory
[Format] ASCII FS g 1 m a1 a2 a3 a4 n
L nH d1...dk
Hex 1C 67 31 m a1 a2 a3 a4 n
L nH d1...dk
Decimal 28 103 49 m a1 a2 a3 a4 n
L nH d1...dk
[Range] m = 0
0 ≤ (a1 + a2 × 256 + a3 × 65536 + a4 × 16777216) ≤ 1023
(0 ≤ a1 ≤ 255 , 0 ≤ a2 ≤ 3 , a3 = 0 , a4 = 0)
1 ≤ (n
L + nH × 256) ≤ 1024 (0 ≤ nL ≤ 255 , 0 ≤ nH ≤ 4)
32 ≤ d ≤ 255
k = (n
L + nH × 256)
The entire capacity size = 1KB.
[Description] • Stores the data (d1...dk) in the area from (a1 + a2 × 256 + a3 × 65536 + a4 ×
16777216) to (n
L + nH × 256) bytes in the NV user memory.
[Notes] • Frequent write command executions by an NV memory write command may damage
the NV memory. Therefore, it is recommended to write to the NV memory less than
10 times a day.
• If the power is turned off or the printer is reset via an interface while this command is
being executed, the printer may go into an abnormal condition. Be careful not to
turn the power off or let the printer be reset via an interface while this command is
being executed.
• While processing this command, the printer is BUSY while writing data to the NV
memory and stops receiving data. Therefore, be sure not to transmit data, including
the real-time commands while the printer is BUSY.
FS g 2 m a1 a2 a3 a4 nL nH [obsolete command]
[Name] Read from NV user memory
[Format] ASCII FS g 2 m a1 a2 a3 a4 n
L nH
Hex 1C 67 32 m a1 a2 a3 a4 n
L nH
Decimal 28 103 50 m a1 a2 a3 a4 n
L nH
[Range] m = 0
0 ≤ (a1 + a2 × 256 + a3 × 65536 + a4 × 16777216) ≤ 1023
(0 ≤ a1 ≤ 255 , 0 ≤ a2 ≤ 3 , a3 = 0 , a4 = 0)
1 ≤ (n
L + nH × 256) ≤ 80 (1 ≤ nL ≤ 80 , nH = 0)
[Description] • Transmits the data in the area from (a1 + a2 × 256 + a3 × 65536 + a4 × 16777216) to
(n
L + nH × 256) bytes in the NV user memory.
[Note] • When this command is transmitted, the data following must not be transmitted until
the status is received.