Filter
Top Products
3-3
Adjusting the Paper Near-End Detector Location
■
The paper near-end detector
When the paper near-end detector senses that the paper is almost out, the printer
turns on the PAPER LED. The PAPER LED also turns on when the paper is com-
pletely out or paper roll is not installed.
■
Adjusting the paper near-end detector
Because the paper roll core size differs depending on the paper roll, you may
need to adjust the paper near-end detector location.
➀ Make sure the paper core inside diameter is 10.5 to 12.5 mm (0.41 to
0.49")
➁
Determine the paper near-end detecting point on your roll paper and measure
diameter A as shown below.
➂
Find the corresponding adjustment position number from the table below.
Table 3-1. Adjustment Position Number
Diameter A
Adjustment position
number
19