Filter
Top Products
Setting Up the Printer 1-11
2. While holding down the
FEED
button, turn on the printer using
the switch on the front of the printer to begin the self test. The
self test prints the printer settings and then prints the
following, cuts the paper, and pauses. (The
PAPER OUT
light
blinks.)
Self test printing.
Please press the PAPER FEED button.
3. Press the
FEED
button to continue printing. The printer prints a
pattern using the built-in character set.
4. The self test automatically ends and cuts the paper after
printing the following:
*** completed ***
The printer is ready to receive data as soon as it completes the self
test.
Note:
If you want to pause the self test manually, press the FEED
button. Press the FEED button again to continue the self test.