Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
129 128
TM-T88III series
Specification
(STANDARD)
B
GS W nL nH
[Name] Set printing area width
[Format] ASCII GS W
nL nH
Hex 1D 57
nL nH
Decimal 29 87
nL nH
[Range] 0
≤ nL ≤ 255
0
≤ nH ≤ 255
[Description] Sets the printing area width to the area specified by
nL and nH.
• The printing area width is set to [(nL + nH × 256) × horizontal motion unit]].
Printable area
Left margin Printing area width
[Details]
• This command is effective only processed at the beginning of the line.
• In page mode, the printer performs only internal flag operations.
• This command does not affect printing in page mode.
• If the [left margin + printing area width] exceeds the printable area, [printable area width - left
margin) is used.
• The horizontal and vertical motion units are specified by GS P. Changing the horizontal and
vertical motion units does not affect the current left margin.
• The horizontal motion unit (x) is used for calculating the printing area width. The calculated
result is truncated to the minimum value of the mechanical pitch.