Filter
Top Products
EMC and Safety Standards Applied
Printer
Product Name: TM-U300C/D,
TM-U300PC/PD
Model Name: M51JC/D, M51PC/PD
The following standards are applied only
to the printers that are so labeled. (EMC is
tested using the packaged AC adapter.)
Europe: CE marking
North America: EMI: FCC/ICES-003
Class A
Japan: EMI: VCCI Class A
Oceania: EMC: AS/NZS 3548
Taiwan: EMI: Class B
AC Adapter
Product Name:PA-6511/6513,
PB-6509/6510
Model Name: M34PA, M34PB
The following standards are applied only
to the AC adapters that are so labeled.
(The printer and the AC adapter together
are applied to the EMC standards.)
Europe: CE marking
Safety: EN60950
North America: Safety:UL 1950/CSA
C22.2 No. 950
Japan: Safety: Electrical
Appliance and Material
Control Law of Japan
Oceania: Safety: AS 3260
WARNING
The connection of a non-shielded printer
interface cable to this printer will
invalidate the EMC standards of this
device.
You are cautioned that changes or
modifications not expressly approved by
SEIKO EPSON could void your authority
to operate the equipment.
CE Marking
The printer conforms to the following
Directives and Norms:
Directive 89/336/EEC
EN 55022 Class B
EN 50082-1
IEC 801-2
IEC 801-3
IEC 801-4
FCC Compliance Statement
For American Users
This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference, in which case the user will be
required to correct the interference at his
own expense.
FOR CANADIAN USERS
This Class A digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe A est
conforme
à
la norme NMB-003 du
Canada.
i