Filter
Top Products
Making Detailed Adjustments 49
3D Setup
Use this menu to adjust 3D brightness, the 3D display format and other 3D settings.
Note: You should only adjust the 3D Format and Inverse 3D Glasses settings if 3D images aren’t
displaying correctly. Changing these settings unnecessarily may cause problems with 3D
projection.
■ 3D Display
Enables or disables 3D mode. You can also change this setting by pressing the
2D/3D
button on the remote control.
■ 2D-to-3D Conversion
Enable this setting to convert 2D images from an HDMI or WirelessHD source
(PowerLite Home Cinema 3020e only) into 3D content.
■ 3D Format
Use this setting to select the 3D format supported by your video device. In most cases, the
projector will correctly detect the 3D format when this option is set to
Auto. You should
only select the
2D, Side by Side, or Top and Bottom formats when your projector
doesn’t properly display 3D images. See your video source documentation for
information on which mode to select.
■ 3D Depth
Adjusts the depth of the 3D images. Select the
Medium or Strong settings to increase
the appearance of the 3D effect.
■ 3D Brightness
Adjusts the brightness of 3D images. Select the
Medium or High settings if the 3D
display is too dark.
■ Diagonal Screen Size
Match this setting to the size of the projected 3D image to maximize the 3D effect and
the quality of the image.
Signal > 3D Setup > 3D Display
Signal > 3D Setup > 2D-to-3D Conversion
Signal > 3D Setup > 3D Format
Signal > 3D Setup > 3D Depth
Signal > 3D Setup > 3D Brightness
Signal > 3D Setup > Diagonal Screen Size