Filter
Top Products
1. Connect one end of the remote control cable to the SYNC In port on one projector, and connect the
other end to the SYNC Out port on the other projector.
Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.
2. In the Extended menu, set the Sync of Projectors setting to Wired.
Note: If you are using the projector in the same room as another projector that does not support
cable connection, set the Wired Sync Mode setting to Mode 2 in the projector's Extended menu. If
you do not have the optional remote control cable, set the Distance of Projectors setting in the
projector's Extended menu to Mode 2.
Parent topic: Projector Connections
Related references
Projector Setup Settings - Extended Menu
Projector Feature Settings - Settings Menu
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
51