Filter
Top Products
Separate Type
7
Stereo Audio Monitoring
The MEU-WX2 is equipped with stereo speakers (0.5 W + 0.5
W), which enable the user to monitor audio.
Protected Controls
The key-inhibit function helps prevent inadvertent operations
from the control panel.
Convenient Installation
By nature, the use of LCD technology in the LUMA Series
eliminates many concerns inherent in CRT monitors. These
include convergence alignments, geometric distortion, flicker, and
image burn-in. The LUMA Series is also completely resistant to
magnetic fields, making them easier to install than CRT monitors.
Mounting Flexibility
Mountable in a 19-inch EIA Standard Rack
(LMD-212/LMD-172W/LMD152)
The LMD-172W (7U high) and LMD-152 (7U) can be mounted in a
19-inch EIA standard rack with the optional MB-522A and MB-524
Mounting Bracket, respectively. The MEU-WX2 (1U high) can be
mounted in a 19-inch EIA standard rack with the supplied
mounting bracket. Although wider than the 19-inch rack, the
LMD-212 (10U high) can also be rack-mounted using the optional
MB-523 Mounting Bracket.
Mounting the LMD-322W
The large screen LMD-322W can also be mounted on the optional
SU-559 Floor Stand or on a wall using the mounting hooks (330 x
330 mm pitch) on the rear of the display.
VESA Mounting
Complying with VESA standards, the LMD-232W, LMD-212,
LMD-172W, and LMD-152W can easily be mounted (75 x 75
mm pitch) on a wall or a ceiling. Although large in screen size,
these monitors are thin and lightweight because the signal-
processing circuitry is contained in the separate MEU-WX2.
In addition, the arm of the displays can be adjusted with
more flexibility because only one cable is required to connect
the display to the MEU-WX2.
Other Features
• H/V Delay Function
• ACC Off
• DC Operation (LMD-172W, LMD-152 via the MEU-WX2)*
• Setup Level for Analog Component and NTSC signal
• Sub Control on Contrast, Chroma, Phase, and Brightness
• Blue-Only Mode
• Monochrome Mode
• Auto Chroma/Phase Setup
• Power-saving Function (computer input only)
• DCC-2B Plug and Play (computer input only)
* SMF-600 Extension Cable cannot be used for DC operation.
AR (Anti-Reflection) Coated Protection Panel
The LCD panels of the separate type LUMA models use a
robust AR-coated protection layer, which minimizes the chance
of the panel being scratched during transportation. The AR
coating additionally has two unique characteristics: it provides
a high transmission rate of the internal light source to keep
the picture as bright as possible, and it keeps reflection from
ambient light to a minimum. As a result, when used in bright
lighting conditions, high contrast is still maintained even in
dark areas of the picture – a clear benefit over CRT monitors.
Operational Convenience
Advanced Marker Settings
The separate type LUMA Series can display various area
markers, including a center marker, aspect markers, and a
safety zone marker. The brightness of these markers can be
selected from three different levels, white, gray, and dark gray.
What's more, users can select either a black or gray matte to
fill the outer area of the aspect markers.
These flexible marker controls, together with the choice of
many different aspect markers, make the separate type LUMA
Series an extremely convenient display device for a variety of
shooting scenarios – from standard video acquisition to digital
cinematography.
Marker Variation
Color Temperature/Gamma Selection
High/low color temperatures or user preset can be selected.
A variety of gamma modes can also be selected.
Selectable Scan Size for Video Input and Aspect Ratio
The screen size can be selected between 5% over-scan and
0% scan modes. The aspect ratio can be switched between
16:9 and 4:3 according to the input signal.
Three-color Tally
All separate type LUMA panels, excluding the LMD-322W,
come equipped with a tally lamp that can be lit up via a
parallel remote connector. The status of the signal displayed
on the monitor can be identified by the tally color – red,
green, or amber.
Smart APA (Auto Pixel Alignment) for Computer Input
The image size can be automatically adjusted to its optimal
setting with the one-touch APA key.
Parallel Remote Control
The MEU-WX2 can be controlled remotely via its parallel
remote connector. There are 31 functions in the remote
menu (such as the ability to switch input signals), of which
seven can be allocated to the connector.
16:9 Mode 4:3 Mode
Aspect Marker
4:3, 15:9, 14:9, 13:9,1.85:1,
16:9
2.35:1, 1.85:1 & 4:3
Center Marker O
Safety Area 80%, 85%, 88%, 90%, 93%
MK10231V1_p04_13.qxd 06.1.16 8:05 PM Page 7