Filter
Top Products
UM10067
ISP1760; ISP1761 Win CE 5.0 User Installation Guide
4. Adding the ISP176x project to the platform
In this section, you will learn to add the ISP176x Host Controller catalog items to the
operating system design view. It is assumed that the platform is already created and the
ISP176x catalog files have been imported.
If you are working on the PCI bus, you need to add the PCI bus driver to route the PCI
interrupt to the ISP176x. If you are using the GPIO bus, you can ignore this step. To add
the PCI bus driver, add module Catalog\ThirdParty\ST-ERICSSON \ PCIKit.
Fig 23. Adding the component: PCI kit.
To add the ISP176x module to the platform, add module Catalog\ThirdParty\ ST-
ERICSSON\1761HostController.
UM10067_3 © ST-ERICSSON. All rights reserved.
User manual Rev. 03 — 12 October 2009 15 of 25