ETA Systems ETA-20SH Power Supply User Manual


  Open as PDF
of 16
 
– 10 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
WiringWithanETA-ECS3SequencerController
ECMDCVTrigger-The ETA-ECS3 can handle 15A of current before the breaker opens. If 15A is not enough current to support your
power requirements you can use the 24VDC trigger to activate an additional power outlet such as the ETA-20SH. This triggered 24VDC
voltage works in conjunction with Sequence 3 timing section. Contact ETA Systems for AC outlet options.
MountingRails–The ETA-20SH can be mounted into most racks that have at least 12" of internal height. The housing has breakaway
rail mounting tabs that make it convenient to secure the raceway in most applications. There are two rails to secure the ETA-20SH to a
cabinetorwall.Multipleslotsareprovidedforeaseofinstallation.Whenmountingtoarackrailsystemuse10/32"x1"screws,when
mounting to a wall surface use two #8 Wood or Metal Screws. To break the rail tabs off, simply bend the rail tabs back and forth with a
pliers until the metal separates.
Note: After the metal breaks, sharp corners may need to be filed to prevent injury.
ACPowerCord–TheETA-20SHcomeswitha9'(3m)12-gaugePowerCord.TheplugtypeisNEMA5-20P
G
W
ETA-20SH
AC Power Conditioning & Suppression Module
 previous next