Filter
Top Products
Our engineers have spent years designing transducers, studio
electronics and high performance studio monitoring systems, including some of
the most popular professional speakers used today. Now, using the latest in
digital acoustic design tools, along with high performance driver and power
amplifier technology, we’ve developed the Event Project Studio monitors,
which extend the performance and value limits of direct field monitors again.
Event engineers based these new 100 watt Project Studio monitors on
the sound and reliability of our 200 watt 20/20bas 8” two-way Biamplified
System. Indeed, the new biamplified PS8 monitor uses the same drivers,
enclosure and active 4
th
order crossover as the 20/20bas monitor, with only 3dB
less maximum acoustic output. The same 100 watt Project Studio amplifier, with
different active crossover and subsonic filters, powers the PS5 and PS6.
The benefits of biamplification include lowered distortion, smoother
amplitude and phase response, extended bandwidth, and convenience. Project
Studio amplifiers feature significant improvements in signal-to-noise ratio, input
common mode rejection ratio, and reliability. They produce less distortion and
less heat as well.
Event Engineers developed the small desktop biamplified PS5 speaker
using shielded driver and active crossover components from our proven Tria
Triamplified Monitor. The PS5’s have a convenient front panel level control
plus a retractable tilt stand for optimum positioning of its wood cabinet in
personal monitoring environments.
The new PS6 6½” monitor uses a new magnetically shielded 6½” LF
driver to go with our proven 1” natural silk dome HF transducer. The PS6 uses
a pair of low restriction bass ports and establishes a convenient intermediate size
for high performance 6” two-way systems.
UNPACKING Check your speaker carefully. The packing container was
designed to protect your speaker during transit; immediately report any damage
to your dealer or to the company that delivered them to you. The packing
material is designed to be reused—do not discard it. Please complete and return
your warranty card to activate your warranty and to help us keep in touch with
you. Please tell us what you think of your new monitor and of your Event
dealer.
SETUP The best performance from any speaker system comes with proper
placement and use. There is no physical or acoustic distinction between
individual left and right monitors when they are used in a stereo pair. Also, the
cabinets can sit vertically or horizontally without concern for performance as
long as both are situated similarly. For horizontal mounting, tip the cabinets
outward so that the high frequency drivers are away from each other. Since the
bass port is front mounted, you can mount the speakers near to, or even in, a
wall without blocking the port.
1
SPECIFICATIONS
LF Driver:
HF Driver:
Frequency Response:
Crossover:
LF Amplifier Power:
HF Amplifier Power:
Noise
Input Connectors:
Polarity:
Input Impedance:
Input Sensitivity:
Input Level Control Range:
PS5: 5 ¼”; PS6: 6½”; PS8: 8" magnetically shielded mineral
filled polypropylene cone with high temperature voice coil
and damped rubber surround.
1" magnetically shielded natural silk dome with ferrofluid
voice coil coolant.
PS5: 45Hz – 39kHz
53Hz – 19kHz, ±3dB, Ref 500Hz
PS6: 45Hz – 20kHz, ±3dB, Ref 500Hz
PS8: 35Hz – 20kHz, ±3dB, Ref 500Hz
PS5: 2.6kHz active 2
nd
order asymmetrical
PS6: 2.6kHz active 4
th
order asymmetrical
PS8: 2.2kHz active 4
th
order asymmetrical
70W
30W
>100dB below full output, 20kHz bandwidth, unweighted
XLR and ¼" connector accepts balanced or unbalanced
sources
Positive signal at + input produces outward LF cone
displacement
40kΩ balanced, 20kΩ unbalanced
0.9V input produces full output with Input Sensitivity
control at maximum
20dB
Protection:
Indicators:
Power Requirements:
Cabinet:
Dimensions:
Weight:
RF interference, output current limiting, over temperature,
turn-on/off transient, subsonic filter, internal mains fuse
Combination Power ON / Clip LED indicator
Factory programmed for either 120V~ 60Hz,
220-240V~ 50/60Hz or 100V~ 50/60Hz, 100VA;
Power via detachable 3 circuit IEC type linecord
5/8" vinyl laminated lock-mitered MDF
PS5: 7½"W x 10½"H x 9"D
PS6: 8¼"W x 12½"H x 10"D
PS8: 10¼"W x 14¾"H x 11¾"D
PS5: 16½ lbs. each
PS6: 23 lbs. each
PS8: 26½ lbs. each
Model PS5, PS6 and PS8 specifications are subject to change without notice.
6
CARE AND MAINTENANCE Your Event Direct Field Monitors will not
require any special care or maintenance if properly used. The cabinet is finished