Filter
Top Products
Installing and Configuring the EVGA nForce 680i SLI Motherboard
32
System Monitor
Use this menu to monitor the real-time system status of your PC, including
temperature, voltages, and fan speed.
The following items on the CMOS Setup Utility main menu are commands
rather than submenus:
Load Defaults
Use this command to load the NVIDIA LinkBoost technology settings for
LinkBoost-enabled systems. Load default system settings for standard
systems.
Set Password
Use this command to set, change, and disable the password used to access
the BIOS menu.
Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
Exit Without Saving
Use this command to abandon all setting changes and exit setup.
The following two items on the CMOS Setup Utility main menu are status
indicators:
NVIDIA LinkBoost (Status indication at bottom of screen)
This status indicator is displayed at the bottom of the BIOS screen and
consists of the following remarks:
¾ Detected: System detects LinkBoost-capable components.
¾ Not Detected: The LinkBoost components are not detected.
SLI-Ready Memory (Status indication at bottom of screen)
This status indicator is displayed at the bottom of the BIOS screen and
consists of the following remarks:
¾ Enabled: SLI-Ready memory is detected and enabled.
¾ Disabled: SLI-Ready memory is detected but disabled.
¾ Not Detected: SLI-Ready memory is not detected.