Filter
Top Products
Hardware Installation
59
Init Display First
This function on the PnP/PCI Configuration menu allows you to define if the
initial display is in the PCI slot or in the PCI Express slot. Options are
[PCI Slot] and [PCIEx].
Reset Configuration Data
This function on the PnP/PCI Configuration menu allows you to enable or
disable the resetting of Extended System Configuration Data (ESCD) when you
exit Setup. Set this to
[Enabled] if you have installed a new add-on and the
system reconfiguration has caused a serious conflict that prevents the OS from
booting. The default setting is
[Disabled].
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the
BIOS can automatically configure all the boot and plug-and-play compatible
devices or if you can manually select IRQ, DMA, and memory base address
fields. Select
[Auto(ESCD)] if you want the BIOS to automatically populate
these fields. If you select
[Manual] so you can assign the resources, IRQ
Resources
is enabled for input.
Resources Controlled By [Manual)]
IR
Q
R
esou
r
ces
[
Pr
ess
En
te
r
]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter