Filter
Top Products
EVGA 19
Fan Connections
There are five fan connections on the motherboard. The fan speed can be detected and
viewed in the
PC Health Status section of the CMOS Setup. The fans are automatically
turned off after the system enters S3, S4 and S5 mode.
Note that the CPU fan cable can
be either a 3-pin or a 4-pin
connector. Connect a 3-pin
connector to pins 1, 2, and 3 on
the motherboard connector.
3 2
GND
+12
V
SENSE
CPU Fan
Connector
4 3 2
GND SENSE
PWR CONTRO
L
EVGA nForce 750i SLI SPP/MCP Fan Connector
Install the fan over the nForce 750i SLI SPP
to draw heat from the MCP. The fan plugs
into a 3-pin connector.
3 2
GND
+12
V
SENSE
A
uxiliary Fan
Connector