EVGA 750i SLI Computer Hardware User Manual


 
EVGA 56
tCL: CAS# latency (options are 1 through 6).
tRDC: RAS#-to-CAS# Delay for Read/Write commands to the same
bank (options are 1 through 7).
tRP: Row Precharge time. This is the Precharge-to-Active or Auto-to-
Refresh of the same bank (options are 1 through 7).
tRAS: This is the minimum RAS# active time (options are 1 through 31).
Command Per Clock: This is the command timing setting on a per
clock unit basis (options are 1T and 2T).
tRRD: RAS#-to-RAS# delay of different banks (options are 1 through
15).
tRC: RAS#-to-RAS# or auto refresh time of the same bank (options are
1 through 31).
tWR: The Write recovery time (options are 2 through 7).
tWTR: This is the minimum write-to-read delay with the same chip
selected (options are 1 through 10).
tREF: This is the DRAM refresh rate (options are Auto, 7.8uS, and
3.9uS).
Parameters Settings Current Value
Memory Timing Setting [Expert]
tCL (CAS Latency) [Auto(5)] 5
tRDC [Auto(7)] 5
tRP [Auto(7)] 5
tRAS [Auto(23)] 18
Command Per Clock (CDM) [Auto(2T)] 1T
** Advanced Memory Settings **
tRRD [Auto(4)] 3
tRC [Auto(28)] 22
tWR [Auto(7)] 5
tWTR [Auto(10)] 9
tREF [Auto] 7.8uS