Exergen DT 1001-LT Scanner User Manual


 
Changing the Battery
A standard 9-Volt alkaline battery will require replacement only once or
twice per year under normal use. To replace, loosen the four captive
screws and remove the cover. Disconnect the old battery and replace
with a new one in the same location. Replace the cover and tighten the
four screws. Use only high quality alkaline batteries or their equivalent.
Fahrenheit or Celsius Conversion
The DermaTemp can be used in either °F or °C. The only tool neces-
sary to convert from one scale to the other is a paper clip.
Find the small hole on the
left side of the red display
filter.
Straighten the paper clip.
Insert the end of the pa-
per clip into the hole and
push to activate the small
switch underneath.
While holding the paper
clip pressed into the switch, turn the instrument on by pressing
the red button.
Remove the paper clip.
To return to the original setting, repeat the process.
9-Volt Alkaline
Battery
Captive Screws
1. Push and hold
2
.
P
us
h
6