Extron electronic DVI Output Card Computer Hardware User Manual


  Open as PDF
of 6
 
DVI Output Card Installation
Installation, cont’d
4
2. If the rear panel DVI connector opening is covered, remove the
two screws that secure the cover to the back panel and remove
the cover.
3. Position the DVI card above J14 with the DVI connector facing
toward the rear of the switcher. Ensure the pins on the DVI
card properly align with the J14 socket to prevent bending.
4. Carefully insert the DVI board 45-pin connector into socket J14
on the main circuit board (figure 3).
DVI Output Card
Mated to the
Main Board via
Socket J14
DVI Output Card
DVI Output Card
DVI Connector
Figure 3 — Output DVI board installation
5. Secure the DVI card to the rear panel with the two screws
provided in the kit.
C Carefully inspect the pins to be certain all are properly seated
in the socket before proceeding. The board connector should
have all pins inserted the same depth.
 previous