Extron electronic IN1604 DTP Switch User Manual


  Open as PDF
of 4
 
4
68-2631-50 Rev. A
07 14
Extron Headquarters
+800.633.9876 Inside USA/Canada Only
Extron USA - West Extron USA - East
+1.714.491.1500 +1.919.850.1000
+1.714.491.1517 FAX +1.919.850.1001 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Extron Korea
+82.2.3444.1571
+82.2.3444.1575 FAX
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
© 2014 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
SIS Commands
The IN1604 Series can be congured with specic SIS commands via an RS-232 or USB connection. Use the Extron DataViewer utility or a
control system to send and receive SIS commands. The table below lists a selection of SIS commands. For a full list of SIS commands and
variables, see the IN1604 Series User Guide at www.extron.com.
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Select audio and video input
X!! InX!
•
All] Selects audio and video input X!.
View current input
!
X!]
View the current input.
Set input 1 format
1*X@\ Typ1*X@] Set input 1 to format X@.
Execute Auto-Image™
A
Img0]
Executes an Auto-Image on the current input.
Execute Auto-Image and ll
1*A
Img1]
Executes an Auto-Image and lls the output.
Execute Auto-Image and follow
2*A
Img2]
Executes an Auto-Image and maintains the aspect ratio of
the current input.
Mute video to black
1B
Vmt1]
Mutes the video and displays a black output.
Mute video and sync
2B
Vmt2]
Mutes the video and sync output.
Unmute video and sync
0B
Vmt0]
Unmutes the video.
View video mute status on all
outputs
B
X2(]
View the video mute setting.
Set global audio mute
X(Z AmtX(]
Enable or disable audio mute on all outputs.
Set discrete audio mute
X4**X(Z AmtX4**X(] Enable or disable audio mute on output X4*.
View output audio mute status
Z
X(
•
X(]
View the audio mute status for the analog and digital
outputs.
Set volume level
X3^V VolX3^] Set the volume to X3^.
Increment the volume level
+V
VolX3^]
Increase the output volume by 1 dB.
Decrement the volume level
-V
VolX3^]
Decrease the output volume by 1 dB.
View the volume level
V
X3^]
View the current volume level.
Enable executive mode 1
1X
Exe1]
Locks the entire front panel.
Enable executive mode 2
2X
Exe2]
Locks the front panel except for input selection.
Disable executive modes
0X
Exe0]
Allows all front panel adjustments and selections.
Disable auto switch mode
E0AUSW} Ausw0]
Manual input switching only.
Auto switch high to low
E1AUSW} Ausw1]
Automatically switches to the highest numbered active
input.
Auto switch low to high
E2AUSW} Ausw2]
Automatically switches to the lowest numbered active
input.
NOTES:
X! = Input selection (1-4)
X@ = Input video format (1 = RGB; 2 = YUV; 3 = S-video 4 = composite; 5 = HDMI/DVI)
X( = Enable or disable (0 = off or disabled; 1 = on or enabled)
X2( = Video mute on all outputs (0 = unmute; 1 = mute to black; 2 = Mute all output sync and video)
X3^ = Audio volume (-100 to 0 in 1 dB steps where -100 = 100 dB and 0 = 0 dB; -10 = default)
X4* = Audio output mute (1 = Analog audio; 2 = embedded HDMI audio)
Firmware Upgrades
The rmware of the scaler can be upgraded via PCS or the Extron Firmware Loader program (available at www.extron.com).
 previous