Filter
Top Products
MLC 104 Series MediaLink Controllers • Software Setup
Software Setup, cont’d
3-22
MLC 104 Series MediaLink Controllers • Software Setup
3-23
Uploading a configuration
The process of uploading your project is essential to successfully
configuring the MLC 104 and creating a GlobalViewer Web page
for the MLC 104 IP. You can upload the project to one MLC at a
time or several at once.
N
You can configure devices offline, but the device must be
connected to the network for a successful upload.
The Upload Manager appears only after a build has been
successfully performed on at least one device. If errors occur
during the build of any devices, a dialog box appears listing the
errors.
The Upload Manager window before file upload
To begin the upload, do the following:
1. Click Begin. The Upload Manger monitors the progress of
the download.
2. Click Close.
The configuration should now be successfully uploaded to
the appropriate product(s).
Accessing GlobalViewer
®
After uploading a configuration file to a MLC 104 IP controller,
there are two ways to access the GlobalViewer Web page:
From the Upload Manager window, click the
Test GV System button.
Right-click the MLC 104 IP controller icon in the IP Link
tree and select Open GlobalViewer
®
Webpage.
GlobalViewer main page
•
•