Filter
Top Products
MediaLink VersaTools Switchers • Specifications, Part #s, Accessories
MediaLink VersaTools Switchers • Specifications, Part #s, Accessories
Specifications, Part Numbers, Accessories, cont’d
General
Power............................................. 12VDC, 0.4 A from an optional MediaLink
Controller (MLC) or from an included
100VAC to 240VAC, 50/60 Hz, external,
autoswitchable, 12VDC, 1 A max. power
supply
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount................................... Yes, with optional VersaTools rack shelf,
part #60-190-20; or standard 1U rack shelf,
#60-190-01
Furniture mountable with optional mini
under desk brackets, part #70-212-01
Projector mountable with optional
bracket, part #70-217-01
Enclosure type.............................. Metal
Enclosure dimensions ................. 1.7" H x 4.3" W x 3.0" D
(1U high, quarter rack width)
4.2 cm H x 11.0 cm W x 7.6 cm D
(Depth excludes connectors and buttons.)
Product weight............................. 0.7 lbs (0.3 kg)
Shipping weight........................... 3 lbs (1.4 kg)
Vibration ....................................... ISTA/NSTA 1A in carton
(International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.
(7.40-010803-D2)
Impedance .................................... >10 kohms unbalanced, >20 kohms
balanced, DC coupled
Nominal level............................... -20dBV (100mV), -10dBV (316mV), 0dBu
(0.775V), or +4dBu (1.23V); (configurable)
0dBu = 0.775 volts (RMS). 0dBV = 1 volt
+4dBu and 0dBu are professional audio line level standards.
-10dBV and -20dBV are semiprofessional, computer audio, and
consumer audio standards.
Maximum level ............................ +14dBu, (balanced or unbalanced) at
stated %THD+N
Input gain adjustment................. –18dB to +24dB, adjustable per input (via
RS-232/control software)
Aux/Mix level adjustment......... -43dB to +24dB (adjustable only via front
panel)
Audio output
Number/signal type ................... 1 stereo or mono, balanced/unbalanced
Connectors .................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error...................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ >+21dBu, balanced or unbalanced at
stated %THD+N
Maximum level (600 ohm) ......... >+15dBm, balanced or unbalanced at
stated %THD+N
0dBu = 0.775 volts (RMS).
An unbalanced-wired output will result in a 6dB attenuation. A
balanced-wired output will have unity (0dB) gain/attenuation.
Control/remote — switcher
Serial control port ........................ RS-232, 3.5 mm, 5-pole captive screw
connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations A = TX, B = RX, D = GND
Program control ........................... Extron’s control program for Windows®
Extron’s Simple Instruction Set™ – SIS™
A-5A-4