Filter
Top Products
MediaLink
™
VersaTools
©
Switchers • Serial Communication
MediaLink
™
VersaTools
©
Switchers • Serial Communication
Serial Communication, cont’d
4-5
Volume adjustment (overall)
Set the overall output volume.
X6
V Vol
X6
Specify the volume for the audio output.
Example: 13V Vol013
Example: set volume to 13.
Increment the volume. +V Vol
X6
Increase audio output.
Decrement the volume. -V Vol
X6
Decrease audio output.
View the volume level. V Vol
X6
Show the output volume.
Executive mode
Turn executive mode off. 0X Exe0 Enable front panel operation. Adjustments and
selections can be made from the front panel.
Turn executive mode on. 1X Exe1
Lock front panel adjustments and switching;
make changes by RS-232 only. Only Aux/Mix
volume adjustment is available via front panel.
View the executive mode status. X Exe
X7
Show executive mode status.
Example: X Exe0
Firmware version, part number & information requests
Query firmware version number. Q Ver
X8
Show the switcher’s firmware version.
Request the part number. N N60-497-0X
Show the MLS’s part #.
Request general info. I (see below) Show the MLS’s status.
Vid • Aud • Vol
X1 X1 X6
Video input # X1
is selected/active.
Audio input
# X1 is
selected/active.
Audio volume
level is .
X6
Zap (reset to default settings)
Zap all MLS settings/memories.
Esc
zXXX ZapXXX Reset everything (all settings and adjustments)
to the factory default.
Command/response table for SIS commands
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Input selection
Select an input (audio and video).
X1
! Chn
X1
Select input
X1
(audio and video).
Example: 4! Chn4
Example: select input 4.
Select an audio input.
X1
$ Aud
X1
Select input
X1
audio only.
Select a video input.
X1
& Vid
X1
Select input
X1
video only.
Audio input gain/attenuation (per input)
Set a specific input’s audio gain.
X4
*
X2
GIn
X4
Aud=
X5
Set a single input’s gain (in dB).
Example: 3*9G In
X4
Aud=+09 Example: set input 3’s gain to +9dB.
Set a specific input’s audio attenuation.
X4
*
X3
gIn
X4
Aud=
X5
Set an input’s attenuation (in dB).
Increment a specific input’s gain.
X4
*+G In
X4
Aud=
X5
Increase an input’s gain by 1 dB.
Decrement a specific input’s gain.
X4
*-G In
X4
Aud=
X5
Decrease an input’s gain by 1 dB.
View a specific input’s audio gain level.
X4
*G In
X4
Aud=
X5
Show an input’s audio level.
Set current input’s audio gain.
X2
GIn
X4
Aud=
X5
Set the current input’s gain (in dB).
Set current input’s audio attenuation.
X3
gIn
X4
Aud=
X5
Set attenuation (in dB).
Increment current input’s gain. +G In
X4
Aud=
X5
Increase the gain by 1 dB.
Decrement current input’s gain. -G In
X4
Aud=
X5
Decrease the gain by 1 dB.
View current input’s audio gain level. G In
X4
Aud=
X5
Show the audio level.
Audio mute (overall)
Mute on 1Z Amt1 Mute all audio outputs.
Mute off 0Z Amt0
Unmute all audio outputs.
View the audio mute status. Z Amt
X7
Show the status of audio mute.
4-4