Filter
Top Products
Operation and Setup, cont’d
MLS 304 Series, MLS 406 Series • Operation and Setup
3-10
PRELIMINARY
If you are unable to configure the MLS via the Windows
®
-based
software
1. Check the MediaLink Control Software to determine its version number. The
software version number appears in the top bar of the program’s window:
These MLS 304 Series and MLS 406 Series switchers can be set up using
software version 2.1 or higher. Earlier versions are not designed to work with
these models.
2. Verify that the connector at the RS-232/MLC/IR port is correctly wired and
that the PC’s correct COM port is selected when you start the software.