Filter
Top Products
Refer also to the MTPX Plus User’s Manual at www.extron.com.
Refer also to the MTPX Plus User’s Manual at www.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Output skew adjustment
Set all output skew adjustment
values
EX@
*
X*
*
X*
*
X*
Oseq
}
Oseq
X@
*
X*
*
X*
*
X*]
Set a specific skew adjustment for the TP
output.
X*
values are listed in RGB order.
Example:
E
2*0*0*4Oseq
}
Oseq02*0*0*4
]
Set output 2’s skew settings as follows:
Red = 0 ns
Green = 0 ns
Blue = 8 ns (delayed 8 ns).
Increment one output skew
adjustment value
EX@
*
X(
+Oseq
}
Oseq
X@
*
X*
*
X*
*
X*]
Increase the
X(
skew plane adjustment for
output
X@
by 1 step (2 ns).
Decrement one output skew
adjustment value
EX@
*
X(
-Oseq
}
Oseq
X@
*
X*
*
X*
*
X*]
Decrease the
X(
skew plane adjustment for
output
X@
by 1 step (2 ns).
Example:
E
2*2*-Oseq
}
Oseq02*0*0*3
]
Decrease the blue skew for output 2 by
2 ns (from 8 ns to 6 ns).
Read output skew adjustment
values
EX@
Oseq
} X*
*
X*
*
X*]
Output pre-peaking
Set output pre-peaking on
EX1)
*1Opek
}
Opek
X1)
*1
]
Pre-peak the TP output.
Set output pre-peaking off
EX1)
*0Opek
}
Opek
X1)
*0
]
Do not pre-peak the TP output.
Read output pre-peaking setting
EX1)
Opek
} X1!]
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Local video output sync polarity
N
The command structure differs, depending on the size of the matrix. Matrix sizes 1616 and smaller, excluding the MTPX Plus 128, do not
need the local output variable (
X1#
). The MTPX Plus 128 and matrix sizes 1632 and larger require the variable.
Set local output polarity
(matrix size 1616 and smaller)
EX1@
Opol
}
Opol
X1@]
Set the horizontal and vertical sync
polarity for a local output.
Example:
E
0Opol
}
Opol0
]
Set the local output to output negative
horizontal and vertical sync.
Set local output polarity
(matrix size 1632 and larger)
EX1#
*
X1@
Opol
}
Opol
X1#
*
X1@]
Set the horizontal and vertical sync
polarity for local output
X1#
.
Example:
E
2*0Opol
}
Opol2*00
]
Set local output 2 to output negative
horizontal and vertical sync.
Read local output sync settings
(matrix size 1616 and smaller)
E
Opol
} X1@]
Read local output sync settings
(matrix size 1632 and larger)
EX1#
Opol
} X1@]
N
X1@
= Local output sync polarity 0 = H- / V- (default)
1 = H+ / V-
2 = H- / V+
3 = H+ / V+
4 = NTSC (no sync stripping)
X1#
= Local video output number 1 (matrix sizes 1616 and smaller)
1 or 2 (matrix sizes 1632 and larger)
N
X@
= Output number
01 – (maximum number of inputs for your model)
X*
= Skew adjustment range 00 – 31 (each step = 2 ns)
X(
= Video plane 0 = red, 1 = green, 2 = blue
X1)
= Pre-peakable output number 01 – half of the outputs for your matrix switcher model (such as 04 for MTPX Plus 168)
X1!
= Pre-peaking 0 = off
1 = on
MTPX Plus Series • Remote Control and Optimizing the Video
Remote Control and Optimizing the Video, cont’d
4-8
MTPX Plus Series • Remote Control and Optimizing the Video
4-9