Filter
Top Products
3-5QSD 204 • Serial Communication
View the brightness value Y Brt
X10
Show the brightness setting.
Detail mode
Set the detail level
X13
D Det
X13
Specify the detail level.
View the detail value D Det
X13
Show the detail setting.
Horizontal shift
Set horizontal position
X10
H Hph
X10
Specify the horizontal position.
Increment +H Hph
X10
Shift right.
Decrement -H Hph
X10
Shift left.
View the horizontal pos. value H Hph
X10
Show the horizontal position.
Vertical shift
Set the vertical position
X10
/ Vph
X10
Specify the vertical position.
Increment up +/ Vph
X10
Shift up.
Increment down -/ Vph
X10
Shift down.
View the vertical pos. value / Vph
X10
Show the vertical position.
Top blanking
Specify a top blanking value
X17
( Blt
X17
Set the number of lines to
blank at the top of the picture.
Increase the top blanking value +( Blt
X17
Increase the # of top lines
blanked.
Decrease the top blanking value -( Blt
X17
Decrease the # of top lines
blanked.
View the top blanking value ( Blt
X17
Show the number of lines that
are blanked at the top of the
picture.
Bottom blanking
Specify a bottom blanking value
X17
) Blb
X17
Set the number of lines to
blank at the bottom of the
picture.
Increase the bottom blanking value +) Blb
X17
Increase the number of lines
blanked at the bottom.
Decrease the bottom blanking value-) Blb
X17
Decrease the number of
bottom lines blanked.
View the bottom blanking value ) Blb
X17
Show the # of bottom lines
that are blanked.
Freeze
Enable 1F Frz1 Output a “frozen” video
image.
Disable 0F Frz0 Turn off freeze (output
motion).
View the freeze status F Frz
X2
Show the freeze status.
Example: F Frz0
Executive mode
Disable 0X Exe0 Adjustments & selections can
be made from the front panel.
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to decoder) (decoder to host)