Extron electronic SMX System Switch User Manual


 
Specifications — SMX System MultiMatrix Switchers, cont’d
Extron SMX System MultiMatrix Modular, Multi-plane Matrix Switchers • Specications
4
Sync — VGA (SMX 84/88/1616 VGA)
Input type ��������������������������������������� RGBHV, RGBS, RGsB, RsGsBs
Output type ������������������������������������ RGBHV, RGBS, RGsB, RsGsBs (follows input)
Input level �������������������������������������� 0�5 V to 5�0 Vp-p, 4�0 Vp-p normal
Output level ����������������������������������� AGC to TTL: 4�0 V to 5�0 V p-p, unterminated
Input impedance ��������������������������� 510 ohms
Output impedance ������������������������ 75 ohms
Horizontal frequency �������������������� 15 kHz to 150 kHz
Vertical frequency �������������������������� 30 Hz to 150 Hz
Max� propagation delay ��������������� 40 ns
Max� rise/fall time ������������������������ 18 ns
Polarity�������������������������������������������� Positive or negative (follows input)
Digital video — SMX 44/84/88/1616 SDI
Routing
SMX 44 HD SDI ����������������� 4 x 4 matrix
SMX 84 HD SDI ����������������� 8 x 4 matrix
SMX 88 HD SDI ����������������� 8 x 8 matrix
SMX 1616 HD SDI ������������� 16 x 16 matrix
Gain ������������������������������������������������� Unity
Maximum data rate����������������������� 2�97 Gbps
Data types ��������������������������������������� 8 or 10 bit
Operation standards ��������������������� SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT�601, ITU-RBT�1120
Digital video input — SMX 44/84/88/1616 SDI
Number/signal type ��������������������� 4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI
Connectors ������������������������������������� 4, 8, or 16 BNC female
Nominal level �������������������������������� 0�80 Vp-p ± 10%
Impedance �������������������������������������� 75 ohms
Return loss �������������������������������������� <-15 dB @ 1 MHz to 1�5 GHz
Equalization ����������������������������������� Automatic
Input cable equalization distance
HD-SDI
Extron SHR, Belden 1694A cable ��������������������492' (150 m)
Extron HR, Belden 1505A cable ������328' (100 m)
SDI
Extron SHR, Belden 1694A cable ��������������������984' (300 m)
Extron HR, Belden 1505A cable ������656' (200 m)
N
The transmission distance varies depending on the signal resolution and on the type of cable,
graphic card, and display used in the system.
Digital video output — SMX 44/84/88/1616 SDI
Number/signal type ��������������������� 4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI
Connectors ������������������������������������� 4, 8, or 16 BNC female
Nominal level �������������������������������� 0�80 Vp-p ± 10%
Impedance �������������������������������������� 75 ohms
Return loss �������������������������������������� <-15 dB @ 1 MHz to 1�5 GHz
DC offset ����������������������������������������� ±0�5 V with input at 0 offset
Re-clocking ������������������������������������� Automatic, or use available bypass mode for nonstandard rates
Jitter ������������������������������������������������� <0�2 VI