Filter
Top Products
7
Extron SMX System MultiMatrix Modular, Multi-plane Matrix Switchers • Specications
Digital video ���������������������� RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component
video (HDMI), actively buffered (supports all single link DVI (if using an
optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200
@ 60 Hz computer video)
N
These SMX HDMI Series boards are not compatible with HDMI 1.3.
Digital audio ���������������������� Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines,
actively buffered�
Consumer Electronics Control (CEC)
Supports CEC wired infrared data pass-through using the HDMI 1�2
standard�
EDID and DDC ������������������ Supports Extended Display Identification Data (EDID) and Display Data
Channel (DDC) data using DVI and HDMI standards� EDID and DDC
signals are actively buffered�
HDCP ���������������������������������� Compliant with High-bandwidth Digital Content Protection (HDCP) using
DVI and HDMI 1�2 standards
HPD ������������������������������������� Supports hot plug detection (HPD) of display as a pass-through signal�
Maximum data rate����������������������� 4�95 Gbps (1�65 Gbps per color)
Maximum pixel clock ������������������� 165 MHz
Standards ���������������������������������������� DVI 1�0, HDMI 1�2
Switching speed ���������������������������� 200 ns, max�
Video input — SMX 44/48/84/88 HDMI
Number/signal type ��������������������� 4 or 8 (depending on model) digital RGB single link HDMI (or DVI-D*)
Connectors ������������������������������������� 4 or 8 female HDMI type A
Equalization ����������������������������������� Automatic
Input cable length ������������������������� >50' (15�24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
Video output — SMX 44/48/84/88 HDMI
Number/signal type ��������������������� 4 or 8 (depending on model) digital RGB single link HDMI (or DVI-D*)
Connectors ������������������������������������� 4 or 8 female HDMI type A
Re-clocking ������������������������������������� Automatic
Peripheral device power �������������� 250 mA per output
Optical specifications — SMX 88/1616 Fiber Optic I/O board
N
The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825,
FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
Number/type �������������������������������� 8 or 16 single mode, or 8 or 16 multimode fiber optic inputs and outputs per
I/O card
N
Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is
required to transmit return data for bidirectional control/communication.
Connectors ������������������������������������� 8 or 16 LC connectors per I/O card
Operating distance ������������������������ 30 km (18�75 miles) with singlemode (SM) cables with a FOX 500 DA6 SM or
FOX 500 TX/RX SM
0�15 km (492') with multimode (MM) cables with a FOX 500 DA6 MM or
FOX 500 TX/RX MM
N
Operating distance is approximate. These are typical distances. The maximum distance may
be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth,
connector splicing, losses, modal or chromatic dispersion,
Nominal peak wavelength����������� 850 nm for multimode (MM), 1310 nm for single mode (SM)