Filter
Top Products
LCD SYMBOL DESCRIPTIONS
1. Over Load --The connected load exceeds the UPS output rating.
Remove some of the load from the UPS to correct this
condition.
2. Load Level --Bar graph indicates the percent of UPS load capacity
remaining.
3. UPS is loaded - This symbol is displayed when the UPS output load
exceeds 30 watts and disappears when the load is
under 25%.
4. Normal Mode - The sinewave symbol will be displayed when the
UPS is operating normally from the utility line.
Battery Mode - The sinewave and battery symbols will blink when
the UPS is operating on its internal battery.
Test Mode - The sinewave symbol will display steadily and the
battery symbol will blink during a UPS self test.
5. Buck Mode - The Automatic Voltage Regulator (AVR) is reducing
the UPS output voltage due to a high utility voltage
condition. The sinewave symbol is also displayed to
indicate that the UPS is operating normally from the
utility line.
LCD DISPLAY
7