Filter
Top Products
66
B. Standard Print
Head Cleaning
This procedure is
performed if you
notice a streak on the
page where ink was
not transferred.
1. Open the printerÕs
top cover with the
Cover Release Lever.
2. Remove the Ribbon
Cartridge from the
printer. If you observe
dust and/or other par-
ticles laying on the top
surface of the ribbon,
manually roll it up into
the take-up roll.
Occasionally, dust may
settle on the top
surface of the ribbon
sheet and cause print
quality problems.
3. Use a soft, lint-free
cloth to wipe dust and
any accumulated
particles off the surface
of the print head.
4. Re-install the
Ribbon Cartridge and
shut the cover. If a
streak in the printout
persists, perform the
steps in section C, on
the next page.
Ribbon
Guard
Print
Element
Plastic
Cover
Print
Head
Print
Head
Supply
Tray
Output
Tray
Drive
Roller