43
ENGLISH
Getting Started Preparation Basic Operation Settings Troubleshooting Others
Cleaning and Replacing the Filter
A Remove the inner filter
B Clean the filter
C Reinstall the inner filter
Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.
zWash the filter with water and dry it in a shaded area.
zIn extremely soiled cases, use of a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.
zAfter washing the filter with water, make sure that it is completely dry before
reinstalling. Otherwise, electric shocks or malfunctions may occur.
zDo not clean the filter with a vacuum cleaner or air duster. The filter is soft
and may be damaged.
Lift up while pushing the claw
zPull the power plug from the power
outlet.
If the filter is damaged or too
...............................
dirty to be cleaned
z
Replace with a new filter. A dirty
filter will dirty the internal parts of
the unit and cause shadows on the
video image.
zTo purchase a new filter or when
there is dirt in the internal parts,
consult your authorized dealer.
Inner Filter
Part No. :[Contact your retailer]
CAUTION
MEMO
Check that the left and right
claws are locked onto the unit
DLA-RS2_EN.book Page 43 Friday, October 12, 2007 2:43 PM