Fellowes Cordless Mouse User Manual


 
HARDWARE REQUIRMENTS
The Fellowes Ergo Tech Cordless requires a PC-compatible computer
with an available USB or PS/2 port. The Ergo Tech Cordless will
function as a standard one-button mouse when connected to a
Macintosh USB port.
SOFTWARE REQUIRMENTS
The Fellowes Ergo Tech Cordless requires Windows 95/98/NT
4.0/2000/ME or XP. Be sure to check the Fellowes website at
www.fellowes.com for the latest drivers supporting the latest
operating systems. If your system operates using Windows NT 4.0, do
not install the Fellowes Easy Point software. The mouse will function
using the native drivers in the NT 4.0 operating system.
GET CONNECTED
Installing the Software
a. Before installing the Fellowes Easy Point driver, we suggest you
check if any other mouse driver is installed in your system. If yes,
to avoid conflict with the Fellowes driver, please un-install or
remove that driver before installation of the Fellowes Easy Point
software.
b. Remember to save your Fellowes Easy Point CD in case you ever
need to reinstall the software.
c. The input device will not function properly without installation of the
Fellowes Easy Point software. The device will work as a basic mouse
as soon as you plug it in, but to make full use of the device, you
must install the software.
Turn on the power to your computer:
a. Insert the Fellowes Easy Point CD into your CD-ROM drive. The
Fellowes Easy Point software is programmed to Auto Run, however
if this function is disabled in your computer please follow the steps
outlined on the next page:
4
3
2