2
IMPORTANT SAFEGUARDS
• NEVER insert hands or fingers into paper entry as serious personal
injury may result.
• THIS MACHINE IS NOT A TOY. Keep children and pets away from
shredder AT ALL TIMES as serious injury may result. Always
unplug shredder when not in use.
• Keep loose objects (jewelry, ties, long hair) away from shredder.
These items and others like them may cause serious injury if they
accidentally fall into the paper entry.
• Do not exceed recommended sheet capacity.
• Do not shred plastic (except credit cards), continuous forms, adhe-
sive labels, transparencies, newsprint, or cardboard.
• This personal shredder is intended for paper only. Do not attempt
to shred paper clips or other hard materials (except staples).
• Do not place shredder near or over a heat source or water.
• Always turn off and unplug unit before moving or cleaning and
when not in use.
• Do not insert aerosol cleaners or lubricants into or around the
s h r e d d e r. Some agents may combust, causing serious injury.
• Do not use this product if it or the cord has been damaged in any
w a y.
• Do not open the cover for any reason. Doing so can expose you to
dangerous voltages and will void your warranty.
Power Cord Care
• Place power cord in an easily accessible position, because it is the
main disconnect switch.
• Do not place machine where adults, children or animals may walk
on the cord.
• Do not rest anything on the power cord.
• If an extension cord is used, be sure that all products plugged
into the extension cord do not exceed the extension cord ampere
r a t i n g.
Figure 1
A. Paper entry
B . B a s ke t
C . A u t o-start sensor
D. Power switch
E. Shredder head
F. V i e w e r
G. Manual forward button
PARTS OF THE SHREDDER
A S S E M B LY
To assemble shredder head onto baske t
1 . Position shredder head over basket as shown in Figure 1.
2 . Lower shredder head onto basket aligning the rim on the under-
side of the shredder head with the edge of the baske t .
A
B
E
D
F
C
G