Filter
Top Products
Punching
Insert all sheets into the punching area. Lower the handle
to punch holes in paper. Return handle to its original
vertical position and remove sheets. Repeat until all sheets
and covers have been punched.
Note: a maximum 20
sheets can be punched at a time.
Binding the Document
1. Align holes. Place punched documents on binding
tray. Starting at the first hole on either end, twist
binding coil until it has passed through every
hole. (Figure A)
2. Close loop by bending end of coil down towards
binding on each end of the document. (Figure B)
Your document is bound.
Emptying Paper Clippings
To remove, simply pull the waste paper drawer out. Its
oversized design means emptying less frequently.
A
B
C
Specifications
Maximum binding length 11 inches (288mm)
Maximum punching capacity (at a time) 20 sheets
Number of punches 43 (disengagable) (4:1 pitch)
Dimensions (L x W x H) 18-7/8” x 18-1/2” x 9-7/8 “ (480 x 460 x 250mm)
Weight 35.5 lbs. (16.2 kg)
Warranty 1 year
Limited Warranty
Fellowes Manufacturing Company warrants all PC Model Binding Machines to be free from defects in material and
workmanship for a period of one year from the date of purchase by the original consumer. The exception to this
are the punching dies which are subject to wear. If any part is found to be defective during the warrant period,
your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective
part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY,
INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN
DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for
any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights.
You may have other legal rights which vary from state to state. To obtain service under this warranty on
machines purchased in the USA, return the machine prepaid to the address below. Please allow two weeks for
processing.
Return with machine:
• Copy of original sales receipt.
• A card stating your name, address, daytime telephone number, machine model and serial number, plus a brief
description of the problem.
For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact
the appropriate location listed below.
Warrantor: Fellowes Manufacturing Company
Figure A
Figure B