-E3-
Battery replacement
When the BATT/OPR indicator (M-1110C only) does not light
during operation or is lit dimly, replace the batteries.
• When replacing the batteries, use two new batteries of
the same type. Do not mix a used battery with a new
one or mix different types of batteries.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RE-
CYCLED OR DISPOSED OF PROPERLY IN COMPLI-
ANCE WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LO-
CAL COUNTY SOLID WASTE AUTHORITY.
Rechargeable battery
Install the rechargeable battery (SANYO
NBP-30B, not supplied) as shown in Fig.
4. Connect the AC adaptor. The battery
fully charged approximately 8 hours af-
ter the AC adaptor is connected.
• Do not charged continuously for 24
hours or more.
Battery
Install two “AA” batteries (not supplied)
as shown in Fig. 3. Observe proper
polarity.
• If you are not going to use the unit
with batteries for one month or
more, remove the batteries.
Fig. 3