Filter
Top Products
42
Setting
Remote control
This projector provides two different remote control codes; the
factory-set, initial code (Code 1) and the secondary code (Code 2).
This switching function prevents remote control interference
when operating several projectors or video equipment at the same
time.
When operating the projector in “Code 2”, both the projector and
the remote control must be switched to “Code 2”.
To change the code for the projector;
Select either “Code 1” or “Code 2” in this Setting Menu.
To change the code for the remote control;
Press and hold both the MENU and IMAGE buttons together for
10 seconds or more. After changing the code, make sure the
remote control operates properly.
Remote control
Lamp mode
This function allows you to change brightness of the screen.
···· normal brightness
···· the controlled brightness according with input signal
···· lower brightness reduces the lamp power consumption
and extends the lamp life
Key lock
This function locks operation of the top control and remote control.
It is useful to prevent operation by an unauthorized person.
···· not locked.
···· locks operation of the top control. To unlock, use the
remote control.
···· locks operation of the remote control. To unlock, use
the top control.
If the top control accidentally becomes locked and you do not have
the remote control nearby, disconnect the AC power cord from
the AC outlet, and then while pressing the SELECT button,
reinsert the AC power cord. This will release the top control lock.
Key lock
Select Key lock and
this box appears.
Choose one of
these with the
Point ed button
and select [Yes] to
activate it.
USB
This projector is equipped with the USB port for interactive
operation between the projector and computer. Selects either of
the followings as needed.
···· When using the PAGE
ed buttons on the remote
control unit. (p11)
···· When controlling the projector with a computer.
This item is provided for future use. Not available now.
P
-
TIMER
FREEZE
COMPUTER
VIDEO
PAGE
SELECT
D.ZOOM
MUTE
MUTE
VOLUME
-
MENU
MENU
NO SHOW
SHOW
IMAGE
IMAGE
VOLUME
+
KEYSTONE
AUTO PC
ON
-
OFF
CXPK
Press and hold
MENU and IMAGE
buttons for 10
seconds or more.
✔Note:
Lamp mode is not switched into Eco mode ( ) within 2 minutes after the projector
is turned on.