NETWORKSUPERVISION
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To fi nd your local offi ce contact details, go to
www.fl ukenetworks.com/contact.
©
2006 Fluke Corporation. All rights reserved.
Printed in U.S.A. 2/2006 2643418 D-ENG-N Rev A
What are ASEs?
ASEs (Analysis Service Elements) are data
collection and network performance monitor-
ing hardware devices placed on a wide area
network (WAN) or Local Area Network (LAN)
as part of the Visual UpTime Select system,
which offers in-depth, real-time, and historical
visibility into the performance of your
applications infrastructure. In the system,
data gathered by ASEs is stored in the Visual
UpTime Select server and displayed and ana-
lyzed from the Visual UpTime Select Web client.
As a service level management tool, ASEs
indicate when services are being met, provide
warnings when services start to degrade, and
send alerts when services are not met.
Hardware Warranties
Enhanced Gold, Bronze, and International
Gold ASE hardware warranty service programs
are available to help you maximize your
investment in Visual UpTime Select. For more
detailed warranty information, visit:
www.fl ukenetworks.com/visualcustomercare
Ordering Information
For more details, please contact your Visual
UpTime Select authorized reseller or
Fluke Networks Sales at (800) 240-4010
or (301) 296-2300.
4xT1/E1 inline probe ASE specifcations
General Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm)
Weight 7 lbs.
Data Rate T1: 1.536 Mbps, E1: 1.984 Mbps
Timing Mode Derived externally from the T1 or E1 network,
user interface, or internally from the ASE.
Environment
Operating Temperature 0
o
to +40
o
C (+32
o
to +104
o
F)
Storage Temperature -20
o
to +55
o
C (-4
o
to +131
o
×F)
Clearance Requirement Minimum of 3” (7.62 cm) space on sides.
Operating and Storage
Humidity
10% to 80%, noncondensing
Power Requirements
Input 100 to 240 VAC
Frequency 50/60 Hz
Input Current Rating 0.5 amps
T1 Network Interface
(Ports 1-4)
Line Rate 1.544 Mbps ±50 bps synchronous
Line Format B8ZS line coding
Framing ESF framing formats
Input Signal 0dB to -36dB
Output Signal 0, -7.5dB, -15dB, -22.5dB LBO
Pulse Density AT&T 62411
Connector 100 ohm 8-pin modular jack—USOC: RJ48C
Timing Network or User
Channel Selection 1 to 24 channels in any combination
E1 Network Interface
(Ports 1-4)
Line Rate 2.048 Mbps ±102.4 bps synchronous
Line Format HDB3 line coding
Framing CRC4 or FAS framing formats
Time Slot 16 CAS, CCS, or Data
Input Signal 0dB to -43dB
Output Signal 0dB
Connector 120 ohm RJ-48C balanced and 75 ohm BNC unbal-
anced coaxial
Channel Selection 1-31 (includes channel 16) or 1-15, 17-31 (does
not include channel 16)
Serial Port Interface
Baud Rate 19200 or 9600 bps
Parity 8 data bits, no parity
Stop Bit 1 stop bit
Electrical Format EIA RS-232, DTE
Connector RJ-45
Ethernet 10/100BaseT
Interface
Bite Rate 10 or 100 Mbps
Connector 8-pin modular jack: RJ-48